You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 25
Next »
Volumetric flowrate of the fluid phase across the well-reservoir contact
In most popular practical case of a 3-phase fluid model this will be:
In case of Volatile Oil Reservoir the connection with surface flowrates and mass flowrates will be:
(1) |
q_o = \frac{ B_o \cdot ( q_O - R_v \, q_G) }{1- R_v \, R_s} |
|
(2) |
\rho_o = \frac{m_o}{q_o}= \frac{\rho_O + \rho_G \, R_s}{B_o} |
|
(3) |
m_o = \rho_o \cdot q_o = \frac{\rho_O + \rho_G \, R_s}{B_o} \cdot q_o |
|
(4) |
q_g = \frac{ B_g \cdot ( q_G - R_s \, q_O)}{1- R_v \, R_s} |
|
(5) |
\rho_g = \frac{m_g}{q_g}= \frac{\rho_G + \rho_O \, R_v}{B_g} |
|
(6) |
m_g = \rho_g \cdot q_g = \frac{\rho_G + \rho_O \, R_v}{B_g} \cdot q_g |
|
|
(8) |
\rho_w =\frac{m_w}{q_w}= \frac{\rho_W}{B_w} |
|
(9) |
m_w = \rho_w \cdot q_w = \frac{\rho_W}{B_w} \cdot q_w |
|
(10) |
q_t = q_o + q_g + q_w |
|
(11) |
q_t = \frac{B_o - B_g \, R_v}{1-R_v \, R_s} \cdot q_O
+\frac{B_g - B_o \, R_v}{1-R_v \, R_s} \cdot q_G
+ B_w \cdot q_W |
|
(12) |
q_t = \frac{B_o - B_g \, R_v}{(1-R_v \, R_s) \rho_O} \cdot \dot m_O
+\frac{B_g - B_o \, R_v}{(1-R_v \, R_s) \, \rho_G} \cdot \dot m_G
+ \frac{B_w}{\rho_W} \cdot \dot m_W
|
|
(13) |
\rho_t = (\dot m_O + \dot m_G + \dot m_G)/q_t |
|
See Also
Petroleum Industry / Upstream / Subsurface E&P Disciplines / Well Testing (WT) / Flowrate Testing / Flowrate
[ Well & Reservoir Surveillance ]
[ Sandface flowrates ] [ Oil sandface flowrate ] [ Gas sandface flowrate ] [ Water sandface flowrate ]
[ Surface flowrates ] [ Oil surface flowrate ] [ Gas surface flowrate ] [ Water surface flowrate ] [ Total sandface flowrate ]