Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Motivation

...


In many practical cases the reservoir fluid flow created by well is getting aligned with a radial direction towards or away from well.

This type of reservoir fluid flow is called radial fluid flow and corresponding pressure diffusion models provide a diagnostic basis for pressure-rate base reservoir flow analysis.

The radial flow can be infinite acting or boundary dominated or transiting from one to another.

Although the actual reservoir fluid flow may not have an axial symmetry around the well-reservoir contact or around reservoir inhomogeneities (like boundary and faults and composite areas) but still  in many practical cases the long-term correlation between the flowrate and bottom-hole pressure response can be approximated by a radial flow pressure modelthe Radial Flow Pressure Diffusion is evolving towards pressure stabilization and can be efficiently analyzed using the steady state flow model.


Inputs & Outputs

...


InputsOutputs

LaTeX Math Inline
bodyq_t

total sandface rate

LaTeX Math Inline
bodyp(r)

reservoir pressure

LaTeX Math Inline
body{p_i}

initial formation pressure

LaTeX Math Inline
bodyp_{wf}

well bottomhole pressure

LaTeX Math Inline
body\sigma

transmissibility,

LaTeX Math Inline
body\sigma = \frac{k \, h}{\mu}



LaTeX Math Inline
bodyS

skin-factor

LaTeX Math Inline
bodyr_w

wellbore radius

LaTeX Math Inline
bodyr_e

drainage radius


c_t
Expand
titleDetailing


LaTeX Math Inline
bodyk

absolute permeability
LaTeX Math Inline
body
total compressibility, LaTeX Math Inlinebody

LaTeX Math Inline
body

c_t = c_r + c

h

effective thickness

LaTeX Math Inline
body{c_r}

pore compressibility

LaTeX Math Inline
body\mu

dynamic fluid viscosity

LaTeX Math Inline
bodyc

fluid compressibility

LaTeX Math Inline
body{\phi}

porosity




Physical Model

...

Zero wellbore radiusrightarrow r_w = 0
Radial fluid flowHomogenous reservoirFinite reservoir flow boundarySlightly compressible fluid flowConstant rateConstant skin

LaTeX Math Inline
bodyp(t, {\bf r}) \rightarrow p(r)

LaTeX Math Inline
body{\bf r} \in ℝ^2 = \{ x, y\}

LaTeX Math Inline
bodyM(r, p)=M =\rm const

LaTeX Math Inline
body\phi(r, p)=\phi =\rm const

LaTeX Math Inline
bodyh(r)=h =\rm const

LaTeX Math Inline
bodyc_r(r)=c_r =\rm const

LaTeX Math Inline
bodyr_w \leq r \

leq r_e

LaTeX Math Inline
body

< \infty

LaTeX Math Inline
bodyc_t(r,p) = \rm const

LaTeX Math Inline
bodyq_t = \rm const

LaTeX Math Inline
bodyS = \rm const


Mathematical Model

...


Expand
titleDefinition



LaTeX Math Block
anchor3MUX9
alignmentleft
r_{wf} < r \leq r_e


LaTeX Math Block
anchor3MUX9
alignmentleft
p(t, r ) = p(r) \Leftrightarrow  \frac{\partial p}{\partial t}  =  0 



LaTeX Math Block
anchor52112
alignmentleft
 \frac{\partial^2 p}{\partial r^2} + \frac{1}{r} \frac{\partial p}{\partial r} =0



LaTeX Math Block
anchor3MUX9
alignmentleft
p(r_e ) = p_i



LaTeX Math Block
anchorEM415
alignmentleft
\left[ r\frac{\partial p(r )}{\partial r} \right]_{r \rightarrow r_w} = \frac{q_t}{2 \pi \sigma}



LaTeX Math Block
anchor3MUX9
alignmentleft
p_{wf}= p(r_w ) - S \cdot r_w \, \frac{\partial p}{\partial r} \Bigg|_{r=r_w}



...

Equation  

LaTeX Math Block Reference
anchorpwf
 shows how the basic diffusion model parameters impact the relation between drawdown
LaTeX Math Inline
body\Delta p = p_i - p_{wf}
and  and total sandface flowrate 
LaTeX Math Inline
bodyq_t
 and plays important methodological role as they are used in many algorithms and express-methods of Pressure Testing. It also called Dupuis 



Expand
titleProductivity Index Analysis


The Total Sandface Productivity Index for low-compressibility fluid and low-compressibility rocks  does not depend on formation pressure, bottomhole pressure and the flowrate and can be expressed as:

LaTeX Math Block
anchorJ
alignmentleft
J_t = \frac{q_t}{p_i - p_{wf}(t)} =\frac{2 \pi \sigma}{\ln \frac{r_e}{r_w} + S} = {\rm const}

See Also

Physics / Mechanics / Continuum mechanics / Fluid Mechanics / Fluid Dynamics / Radial fluid flow

Petroleum Industry / Upstream / Subsurface E&P Disciplines / Well Testing / Pressure Testing

Well & Reservoir Surveillance ]

Pressure diffusion ] [ Pressure Diffusion @model ] [ Dupuit equation @model ]

p_
dif

с начальным условием:

p(t = 0,
r
) = p_i

и граничными условиями:

p
(t
, r \rightarrow \infty
) 
=
- p
_iBoundary
_
qr \frac{\partial p(t, x )}{\partial r} \bigg|_{r \rightarrow 0} = \frac{q_t}{2
{wf}(t)} =\frac{2 \pi \sigma}
где \sigma = \frac
{
k \, h}{\mu} – гидропроводность пласта, 


The Field-average Productivity Index for low-compressibility fluid and low-compressibility rocks  does not depend on formation pressure, bottomhole pressure and the flowrate and can be expressed as:

LaTeX Math Block
anchorJ
alignmentleft
J_t =
Show If
groupeditors

but this only works for the middle-times and long-times as early times are influenced by wellbore storage and non-linear effects of skin.

p(t,r) = p_i +
 \frac{q_t}
{4 \pi \sigma} \,
{
\rm Ei} \bigg( - \frac{r^2}{4 \chi t} \bigg)Рассмотрим плоскопараллельный аксиально-симметричный однородный пласт постоянной толщины 
Panel
bgColorpapayawhip
Expand
titleEditor
Expand
titleDefinition
Include Page
Line Source Solution (LSS)Line Source Solution (LSS)
LaTeX Math Block
anchorA3E6X
alignmentleft
LaTeX Math Inline
bodyh
, с радиальной координатой 
LaTeX Math Inline
bodyr
 в перпендикулярной к оси скважины плоскости, который вскрыт бесконечно тонкой скважиной в точке 
LaTeX Math Inline
bodyr=0
 (где  – радиальная координата в перпендикулярной к оси скважине плоскости) и начальным пластовым давлением 
LaTeX Math Inline
bodyp_i
.
Пусть  в момент времени 
LaTeX Math Inline
bodyt = 0
 скважина запускается с дебитом 
LaTeX Math Inline
bodyq_t
 (в пересчете на пластовые условия).

Диффузия давления описывается решением уравнения однофазного радиального течения в бесконечном однородном пласте:

LaTeX Math Block
anchor
alignmentleft
\frac{\partial p}{\partial t} = \chi \,  \Delta p = \chi \, \frac{1}{r} \frac{\partial}{\partial r} \bigg( r \frac{\partial p}{\partial r} \bigg)
LaTeX Math Block
anchorN0ZUD
alignmentleft
LaTeX Math Block
anchorBUZLH
alignmentleft
LaTeX Math Block
anchor
alignmentleft
LaTeX Math Inline
body
LaTeX Math Inline
body\chi = \frac{k}{\mu} \, \frac{1}{\phi \, c_t}
 – пьезопроводность пласта, 
LaTeX Math Inline
bodyk
 – проницаемость пласта, 
LaTeX Math Inline
body\phi
 – пористость пласта, 
LaTeX Math Inline
bodyc_t = c_r + c
 – сжимаемость пласта, 
LaTeX Math Inline
bodyc_r
 – сжимаемость порового коллектора, 
LaTeX Math Inline
bodyc
 – сжимаемость насыщающего пласт флюида, 
LaTeX Math Inline
body\mu
 – вязкость насыщающего пласт флюида.

При анализе отклика давления на самой скважине ( 

LaTeX Math Inline
bodyr = r_w
 ) после включения на достаточно больших временах, удовлетворяющих условию:

LaTeX Math Block
anchorAF8JH
alignmentleft
t \gg
\ln \frac{r_
w^2}{4 \chi}

которые на практике наступают очень быстро, можно воспользоваться приближением 

LaTeX Math Inline
body{\rm Ei}(-x) \sim \ln (x) + \gamma \sim \ln (1.781 x)
, где 
LaTeX Math Inline
body\gamma = 0.5772 ...
 – постоянная Эйлера. 

Режим радиального течения к линейному источнику примет вид:
LaTeX Math Block
anchorOSWU0
alignmentleft
p(t,r_w) = p_i + \frac{q_t}{4 \pi \sigma} \,  \ln \bigg( 1.781 \, \frac{r_w^2}{4 \chi t} \bigg)
Отсюда следует, что уже вскоре после запуска скважины динамическая депрессия на пласт начинает логарифмически расти во времени:
LaTeX Math Block
anchor21SAA
alignmentleft
\delta p = p_i - p_{wf}(t) \sim { \rm const } + \frac{q_t}{4 \pi \sigma} \,  \ln t

а логарифмическая производная становится постоянной во времени:

LaTeX Math Block
anchorOFRU1
alignmentleft
t \frac{d (\delta p)}{dt}  \sim \frac{q_t}{4 \pi \sigma}
В лог-лог координатах лог-производная депрессии будет горизонтальной, что является характерным для радиальной фильтрации в бесконечном пласте.
e}{r_w} + 0.5 +S} = {\rm const}


See Also

...

Physics / Mechanics / Continuum mechanics / Fluid Mechanics / Fluid Dynamics / Radial fluid flow / Pressure diffusion / Pressure Diffusion @model / Radial Flow Pressure Diffusion @model

Petroleum Industry / Upstream / Subsurface E&P Disciplines / Well Testing / Pressure Testing

Well & Reservoir Surveillance ]