Synonym: Cumulative Productivity Plot = Hall Plot

One of the Productivity Diagnostics methods based on correlation between cumulative pressure drawdown:

G (t) = \int_0^t \left( p_{wf}(\tau) - p_e(\tau) \right) d\tau

and total sandface cumulative offtake/intake:

Q_t(t) = \int_0^t q_t(\tau) d\tau

where

It shows unit slope on log-log plot for stabilized reservoir flow:

G(t) = J^{-1} Q_t(t)

where

Due to integration procedure the Hall Plot has a better tolerance to uncertainties in formation pressure and bottomhole pressure comparing to Unweighted J-plot and usually results in more accurate estimation of productivity index.

It is highly recommended to plot sandface flowrates rather than surface flowrates to achieve better linearity in correlation for stabilized reservoir flow.

Although it is equally applicable to producers and injectors, due to lack of BHP and formation pressure data availability for producers in most practical cases in the past the Hall plot analysis was mostly applied for water injectors.

The pressure drawdown integral 

G(t) = \int_0^t \left( p_{wf}(\tau) - p_e(\tau) \right) d\tau = \sum_k \left( p_{wf}(\tau_k) - p_e(\tau_k) \right) \delta \tau_k 

See Also

Petroleum Industry / Upstream /  Production / Subsurface Production / Field Study & Modelling / Production Analysis / Productivity Diagnostics