Definition
Primary Production Analysis is the specific workflow and report template on Primary Well & Reservoir Performance Indicators.
Application
- assess current production distribution
- assess current distribution of recovery against expectations
- assess current status and trends of recovery against expectations
- assess current status and trends of reservoir depletion against expectations
- assess current status and trends of water flood efficiency against expectations
- quantitatively compare performance of different wells or different groups of wells
- identify and prioritize redevelopment opportunities
Technology
Primary Production Analysis is built around production data against material balance and require current FDP volumetrics, PVT and SCAL models.
It includes well-by-well diagnostics and gross field diagnostics, but may be extended to sector-by-sector diagnostics.
Metrics
Primary Production Analysis includes the following metrics:
Metric name | Diagnostic plots | Objectives | |
---|---|---|---|
1 | Production History Map | Background = STOIIP & Structure Bubbles = qo, qg , qw, qinj Number = VRR, Pe | Production Distribution Overview |
2 | Recovery Map | Background = STOIIP & Structure Bubbles = Qo, Qg , Qw, Qinj Number = VRR, Pe | Recovery Distribution Overview |
3 | Production History Graphs | Left Axis = qo, qg , qw, qinj, Rigth Axis = Yw, GOR, Pe , Np, Ninj Hor Axis = Elapsed Time | Production History Overview |
4 | Decline Curve Analysis | Left Axis = qo1, qliq1, qinj1, Rigth Axis = Yw, GOR, VRR, Pe Hor Axis = Elapsed Time | Production Forecast |
5 | Recovery Diagnostic | Left Axis = qo1, qliq1, qinj1 Rigth Axis =Yw, GOR, VRR, Pe, Pem Hor Axis = RF | Estimate recovery efficiency and pressure decline |
6 | Watercut Diagnostic | Left Axis = Yw, Ywm Hor Axis = qliq | Check for water balance and thief water production |
7 | GOR Diagnostic | Left Axis = GOR, GORgm Hor Axis =qo | Check for gas balance and thief gas production |
8 | Injection Efficiency Diagnostics | Left Axis = PIR , PIRm Hor Axis = Yw | Evaluate WI efficiency |
9 | Well Performance Analysis | Left Axis = Pwf_IPR , Pwf_VLP Hor Axis = qo | Check for the optimal production/injection target |
10 | Productivity Index Diagnostic | Left Axis = JPI, JPIm Hor Axis = dP = Pwf - Pe | Check for PI dynamics |
Below is the list of the production properties involved on the above metrics.
Property Abbrevy | Property Name | Formula | ||
---|---|---|---|---|
VRRcum | Cumulative Voidage Replacement Ratio |
| ||
VRRinst | Instantaneous Voidage Replacement Ratio |
| ||
RF | Recovery Factor |
| ||
Yw | Watercut |
| ||
GOR | Gas-Oil Ratio |
| ||
qliq | Liquid rate |
| ||
Ywm | Watercut model |
| ||
PIR | Production Injection Ratio |
| ||
PIRm | Production Injection Ratio Model |
| ||
JPIo | Oil Productivity Index |
| ||
JPI | Total Productivity Index |
| ||
JPIm | Total Productivity Index Model |
|
Diagnostic
Sample Case
Fig. 1. Production History Map | Fig. 2. Recovery Map | Fig. 3. Pressure Diagnostic |
Fig. 4. Decline Curve Analysis | Fig. 5. Recovery Diagnostic | Fig. 6. Watercut Diagnostic |
Fig. 7. GOR Diagnostic | Fig. 8. Injection Efficiency Diagnostics | Fig. 9. Well Performance Analysis |
Fig. 10. Productivity Index Diagnostic |