Formation Volume Factor (FVF) for gas:
LaTeX Math Block |
---|
|
B_g(p,T) = \frac{\rho_g^mathring{\circrho}_g}{\rho_g} = \frac{V_g}{\mathring{V}_g^{\circ}}Gg}} = \frac{q_g}{q_{Gg}} |
where
LaTeX Math Inline |
---|
body | --uriencoded--\rho_g%5e%7B\circ%7D |
---|
|
| fluid density at reference conditions | LaTeX Math Inline |
---|
body | --uriencoded--V_m%5e%7B\circ%7D |
---|
|
| molar volume at reference conditions |
| fluid density at reservoir conditions | | molar volume at reservoir conditions |
The reference conditions may vary from case to case but most popular choice are: Separator, Stock Tank and SPE STP.
It can be expressed through the Z-factor as:
LaTeX Math Block |
---|
anchor | XALSKBgRef |
---|
alignment | left |
---|
|
B_g(p,T) = \frac{Z(p, T) \cdot \frac{T}{p}{Z^{\circ}} \cdot \frac{p_T/T^{\rm refcirc}}{T_p/p^{\rm refcirc}} |
where
p_%7B\rm ref%7D | reference pressure |
| reservoir temperature | LaTeX Math Inline |
---|
body | --uriencoded--T%5e%7B\circ%7D |
---|
|
| reference temperature |
|
| LaTeX Math Inline |
---|
body | --uriencoded--Z%5e%7B\circ%7D = Z(T%5e%7B\circ%7D, \, p%5e%7B\circ%7D) |
---|
|
| Z-factor at reference conditions |
If reference conditions are set at SPE STP then reference Z-factor
LaTeX Math Inline |
---|
body | --uriencoded--Z%5e%7B\circ%7D = 1 |
---|
|
is close to 1 for all natural gases and equation LaTeX Math Block Reference |
---|
|
takes explicit form as: LaTeX Math Block |
---|
|
B_g(p,T) = 0.3470 \cdot Z(p, T) \cdot \frac{T}{p} |
where
_%7B\rm ref%7Dreference temperature
See Also
...
Petroleum Industry / Upstream / Subsurface E&P Disciplines / Fluid (PVT) Analysis / Dynamic fluid properties
[ Formation Volume Factor (FVF) ][ Oil formation volume factor (Bo) ][ Water formation volume factor (Bw) ]