...
A specific implementation of Well Testing based on recording and interpretation of borehole (downhole or THP) pressure response to the pre-designed sequence of increasing and decreasing flow rate variations (also called "cycles" or "pulses" ) at one or more disturbing wells wells (called "generators" or "pulsers") inducing pressure pulse propagation across the field.
The usual practise is to create 3 5 – 5 10 pulses.
The pressure response can be recorded in
to rate variation is recorded in the same well where the flowrate is varying (and in this case is called Self-Pulse Test)
...
or in the
...
offset wells (and in this case is called Pressure Pulse Interference Test)
Workflow
...
1 | Designing flowrate variation pulse sequence for disturbing wells (also called generators) based on the field primary data |
2 | Field operations on suspending the downhole gauges (if PDG is not available) |
3 | Performing flowrate variations according to the PCT design |
4 | Retrieving the downhole gauges |
5 | Downloading the data from the downhole and surface gauges |
6 | Primary data processing (gauge syncronization and filtering) |
7 | Implementing pressure pulse-code decomposition (PCD) |
8 | Recognising the PTA type-library diffusion models for decomposed DTR/CTR and type-curve fitting them with analytical and/or numerical pressure diffusion models |
...