Motivation
The stabilized water injection profile satisfies the assumptions of the Stationary Quasi-Isothermal Incompressible Isoviscous Pipe Flow Pressure Profile @model.
Inputs & Outputs
Inputs | Outputs | ||
---|---|---|---|
T_s | Intake temperature | T(l) | Temperature distribution along the pipe |
p_s | Intake pressure | ||
q_s | Intake flowrate | ||
z(l) | Pipeline trajectory TVDss | ||
\theta (l) | Pipeline trajectory inclination, \displaystyle \cos \theta (l) = \frac{dz}{dl} | ||
\rho(T, p) | |||
\mu(T, p) | |||
d | Flow pipe diameter (tubing or casing depending on where flow occurs) | ||
\epsilon | Inner pipe wall roughness |
Assumptions
Stationary fluid flow | Isothermal or Quasi-isothermal conditions | Constant cross-section pipe area A along hole | |
Incompressible fluid \rho(T, p)=\rho_s = \rm const | Isoviscous \mu(T, p) = \mu_s = \rm const |
Equations
|
where
See Also
Petroleum Industry / Upstream / Subsurface E&P Disciplines / Production Technology / Well Flow Performance / Lift Curves (LC) / Water Injection Wellbore Profile @model
[ Water Injection Wellbore Pressure Profile @model ] [ Homogenous Pipe Flow Temperature Profile @model ]