Consider a well-reservoir system consisting of:
- producing well W1 draining the reservoir volume
- water injecting well W2 supporting pressure in reservoir volume which includes the drainage volume of producer W1 and potentially other producers.
The drainage volume difference
LaTeX Math Inline |
---|
body | \delta V_{\phi} = V_{\phi, 2} - V_{\phi, 1} >0 |
---|
|
may be related to the fact that water injection
W2 is shared between
and another reservoir or with another producer.
Case #1 – Constant flowrate production:
The bottom-hole pressure response
in producer
W1 to the flowrate variation
in injector
W2:
LaTeX Math Block |
---|
|
\delta p_1 = - p_{u,\rm 21}(t) \cdot \delta q_2 |
where
Expand |
---|
|
Panel |
---|
borderColor | wheat |
---|
bgColor | mintcream |
---|
borderWidth | 7 |
---|
| Consider a pressure convolution equation for the BHP in producer W1 with constant flowrate production at producer W1 and varying injection rate at injector W2 : LaTeX Math Block |
---|
anchor | Case2_PSS_p11 |
---|
alignment | left |
---|
| p_1(t) = p_i - \int_0^t p_{u,\rm 11}(t-\tau) dq_1(\tau) - \int_0^t p_{u,\rm 21}(t-\tau) dq_2(\tau) = p_i - \int_0^t p_{u,\rm 21}(t-\tau) dq_2(\tau) |
Consider a step-change in injector's W2 flowrate at zero time , which can be written as: LaTeX Math Inline |
---|
body | dq_2(\tau) = \delta q_2 \cdot \delta(\tau) \, d\tau |
---|
| .The responding pressure variation in producer W1 will be: LaTeX Math Block |
---|
anchor | Case2_PSS_p11 |
---|
alignment | left |
---|
| \delta p_1(t) = p_1(t)-p_i = - \int_0^t p_{u,\rm 21}(t-\tau) \delta q_2 \cdot \delta(\tau) \, d\tau = - p_{u,\rm 21}(t) \cdot \delta q_2 |
which leads to LaTeX Math Block Reference |
---|
| . |
|
Case #2 – Constant BHP:
Assume that the flowrate
in producer
W1 is being adjusted to compensate the
bottom-hole pressure variation
in response to the flowrate variation
in injector
W2 so that
bottom-hole pressure in producer
W1 stays constant at all times
LaTeX Math Inline |
---|
body | \delta p_1(t) = \delta p_1 = \rm const |
---|
|
.
In this case, flowrate response
in producer
W1 to the flowrate variation
in injector
W2 is going to be:
LaTeX Math Block |
---|
|
\delta q_1(t) = - \frac{\dot p_{u,\rm 21}(t)}{\dot p_{u,\rm 11}(t)} \cdot \delta q_2 |
where
Expand |
---|
|
Panel |
---|
borderColor | wheat |
---|
bgColor | mintcream |
---|
borderWidth | 7 |
---|
| Consider a pressure convolution equation for the above 2-wells system with constant BHP: LaTeX Math Block |
---|
anchor | Case2_PSS_p11 |
---|
alignment | left |
---|
| p_1(t) = p_i - \int_0^t p_{u,\rm 11}(t-\tau) dq_1(\tau) - \int_0^t p_{u,\rm 21}(t-\tau) dq_2(\tau) = \rm const |
The time derivative is going to be zero as the bottom-hole pressure in producer W1 stays constant at all times: LaTeX Math Block |
---|
anchor | Case2_PSS_p11 |
---|
alignment | left |
---|
| \dot p_1(t) = - \left( \int_0^t p_{u,\rm 11}(t-\tau) dq_1(\tau) \right)^{\cdot} - \left( \int_0^t p_{u,\rm 21}(t-\tau) dq_2(\tau) \right)^{\cdot} = 0 |
LaTeX Math Block |
---|
anchor | Case2_PSS_p11 |
---|
alignment | left |
---|
| p_{u,\rm 11}(0) \cdot q_1(t) + \int_0^t \dot p_{u,\rm 11}(t-\tau) dq_1(\tau) = - p_{u,\rm 21}(0) \cdot q_2(t) - \int_0^t \dot p_{u,\rm 21}(t-\tau) dq_2(\tau) |
The zero-time value of DTR / CTR is zero by definition LaTeX Math Inline |
---|
body | p_{u,\rm 11}(0) = 0, \, p_{u,\rm 21}(0) = 0 |
---|
| which leads to: LaTeX Math Block |
---|
anchor | Case2_PSS_p11_temp |
---|
alignment | left |
---|
| \int_0^t \dot p_{u,\rm 11}(t-\tau) dq_1(\tau) = - \int_0^t \dot p_{u,\rm 21}(t-\tau) dq_2(\tau) |
Consider a step-change in producer's W1 flowrate and injector's W2 flowrate at zero time , which can be written as LaTeX Math Inline |
---|
body | dq_1(\tau) = \delta q_1 \cdot \delta(\tau) \, d\tau |
---|
| and LaTeX Math Inline |
---|
body | dq_2(\tau) = \delta q_2 \cdot \delta(\tau) \, d\tau |
---|
| . Substituting this to LaTeX Math Block Reference |
---|
| leads to: LaTeX Math Block |
---|
anchor | Case2_PSS_p11_temp |
---|
alignment | left |
---|
| \int_0^t \dot p_{u,\rm 11}(t-\tau) \delta q_1 \cdot \delta(\tau) \, d\tau = - \int_0^t \dot p_{u,\rm 21}(t-\tau) \delta q_2 \cdot \delta(\tau) \, d\tau |
LaTeX Math Block |
---|
anchor | Case2_PSS_p11_temp |
---|
alignment | left |
---|
| \dot p_{u,\rm 11}(t) \delta q_1 = - \dot p_{u,\rm 21}(t) \delta q_2 |
which leads to LaTeX Math Block Reference |
---|
| . |
|
For the finite-volume drain
LaTeX Math Inline |
---|
body | V_{\phi,1} \leq V_{\phi,2} < \infty |
---|
|
the flowrate response factor
LaTeX Math Inline |
---|
body | \delta q_1 / \delta q_2 |
---|
|
is getting stabilised over time as:
LaTeX Math Block |
---|
anchor | Case2_PSS |
---|
alignment | left |
---|
|
\delta q_1 / \delta q_2 = f_{21} = \frac{c_{t,2} V_{\phi, 2}}{c_{t,1} V_{\phi, 1}} = \rm const |
Expand |
---|
|
Panel |
---|
borderColor | wheat |
---|
bgColor | mintcream |
---|
borderWidth | 7 |
---|
| For the finite-volume reservoir LaTeX Math Inline |
---|
body | V_{\phi,1} \leq V_{\phi,2} < \infty |
---|
| the DTR and CTR are both going through the PSS flow regime at late transient times:
LaTeX Math Block |
---|
anchor | Case2_PSS_p11 |
---|
alignment | left |
---|
| p_{u,\rm 11}(t \rightarrow \infty) \rightarrow \frac{t}{c_{t,1} V_{\phi, 1}} |
|
LaTeX Math Block |
---|
anchor | Case2_PSS_p21 |
---|
alignment | left |
---|
| p_{u,\rm 21}(t \rightarrow \infty) \rightarrow \frac{t}{c_{t,2} V_{\phi,2}} |
|
where Substituting LaTeX Math Block Reference |
---|
| and LaTeX Math Block Reference |
---|
| in LaTeX Math Block Reference |
---|
| one arrives to LaTeX Math Block Reference |
---|
| . |
|
If pressure in producer W1 is supported by several injectors then:
LaTeX Math Block |
---|
|
\delta q_1 =\sum_k f_{k1} \delta q_k
|
which makes one of the key assumptions in Capacitance Resistance Model (CRM).
See also
[ DTR ] [ CTR ] [ Capacitance Resistance Model (CRM) ]