...
or in the offset wells and in this case is called pressure Pulse Interference Test (PIT)
Workflow
...
| 1 | Designing flowrate variation pulse sequence for disturbing wells (also called generators) based on the field primary data |
| 2 | Field operations on suspending the downhole gauges (if PDG is not available) |
| 3 | Performing flowrate variations according to the PCT design |
| 4 | Retrieving the downhole gauges |
| 5 | Downloading the data from the downhole and surface gauges |
| 6 | Primary data processing (gauge syncronization and filtering) |
| 7 | Implementing pressure pulse-code decomposition (PCD) |
| 8 | Recognising the PTA type-library diffusion models for decomposed DTR/CTR and type-curve fitting them with analytical and/or numerical pressure diffusion models |
Data Processing
...
In case of harmonic pressure pulsations and sufficiently long pressure-rate delay and a simple diffusion model (single-bed homogeneous reservoir without boundary) the pressure response can be approximated by analytical model. In this case the pressure data at receiving wells are being detrended and then matched to analytical model.
...
This type of tests is called Pressure Pulse-Code Test but this approach is equally applicable to simple periodic pulsations.
Interpretation
...
See Also
...
Petroleum Industry / Upstream / Subsurface E&P Disciplines / Well Testing / Pressure Testing / Pressure Transient Analysis
[ Well & Reservoir Surveillance ] [ Pressure Pulse Propagation ]
References
...
...