...
- wellbore fluid deliverability (the ability of well to lift up or lift down the fluid) and which is called OPR or TPR or VFP (equally popular throughout the literature)
...
- Setting up the required production or injection regime for each well upon the current formation pressure, reservoir saturation and production target specified by FDP
- Generating VFP tables as input for 3D simulations
...
- OPR – Outflow Performance Relation ( also called TPR – Tubing Performance Relation and VFP – Vertical Lift Performance (VFP) ) – responsible for well deliverability (see below )
...
The intersection of IPR and OPR VFP curves represent the stabilized flow (see Fig. 1)
Fig. 1. The stablised flow rate is represnted as junction point of WFP – Well Flow Performance and OPR curves. | Fig. 2. The dead well scenario. |
...
In practise, the WFP – Well Flow Performance analysis is often very tentative and production technologists spend some time experimenting with well regimes on well-by-well basis.
...
OPR – Outflow Performance Relation
...
OPR – Outflow Performance Relation also called TPR – Tubing Performance Relation and VLP – Vertical Lift Performance represents the relation between the bottom-hole pressure
LaTeX Math Inline | ||
---|---|---|
|
LaTeX Math Inline | ||
---|---|---|
|
LaTeX Math Block | ||||
---|---|---|---|---|
| ||||
p_{wf} = p_{wf}(q) |
which may be non-linear.
...
...
...
Anchor | ||||
---|---|---|---|---|
|
References
...
Joe Dunn Clegg, Petroleum Engineering Handbook, Vol. IV – Production Operations Engineering, SPE, 2007
...