Page tree

The plot of water production rate q_W (along y-axis) against the oil production rate q_O (along x-axis).

It can be used for express Watercut Diagnostics of thief water production.

The mathematical model of the thief water production from  aquifer is based on the following equation:

(1) q_W = a \, \cdot q_O + b
(2) a = J^{-1}_{1O} \cdot ( J_{1W} + J_{2W})
(3) b = J_{2W} \cdot (p^*_2 - p^*_1)

where


q_W

water production rate

q_O

oil production rate

p^*_1

formation pressure in petroleum reservoir

J_{1W}

water productivity index of petroleum reservoir

J_{1O}

oil productivity index of petroleum reservoir

p^*_2

formation pressure in aquifer

J_{2W}

water productivity index of aquifer



For the case of aquifer pressure is higher than that of petroleum reservoir: b > 0 \Leftrightarrow p^*_2 > p^*_1

For the case of aquifer pressure is lower than that of petroleum reservoir: b < 0 \Leftrightarrow p^*_2 < p^*_1


In practical applications, the equation  (1) is often considered through the weighted average values:

(4) \langle q_W \rangle = a \, \cdot \langle q_O \rangle  + \, b

where

\langle q_W \rangle, \ \langle q_O \rangle

are weighted average of q_W and q_O


There are different ways to calculate weighted average of the dynamic variable, for example:

\langle A \rangle_t \ = \frac{1}{t} \int_o^t A(t) \, dt
\langle A \rangle_q \ = \frac{1}{Q(t)} \int_o^t A(t) \, q(t) \, dt


See Also


Petroleum Industry / Upstream /  Production / Subsurface Production / Field Study & Modelling /  Production Analysis / Watercut Diagnostics



  • No labels