The most general Pump model is given as a function of volumetric flowrate of the intake and discharge pressure :
q = q(p_{\rm out}, p_{\rm in}) |
The electrical power consumption is given by:
W = \eta(q) \cdot q \cdot (p_{\rm out}-p_{\rm in}) |
where
pump efficiency |
In most practical cases the pump model depends on the diffference between intake and discharge pressure and called pump characteristic curve (see Fig. 1):
q = q(p_{\rm out} - p_{\rm in}) |
Fig. 1. Pump Characteristic Curve as function of delta pressure . |
A popular pump proxy model is given by quadratic equation:
|
|
\eta(q) = 4 \, \eta_{\rm max} \cdot q/q_{\rm max} \cdot ( 1 - q/q_{\rm max}) |
where
maximum pressure gain that pump can exert over the input pressure | |
maximum flowrate that pump can produce | |
total hydraulic pump friction (dimensionless) | |
pump efficiency | |
maximum pump efficiency |
Natural Science / Engineering / Device / Pump
Physics / Fluid Dynamics / Pipe Flow Dynamics / Pipe Flow Simulation (PFS)
|