Shut-in formation pressure estimate based on a wellbore sandface pressure after a given well is shut-in for hours

p_e = p_{wf}(t_e) \bigg|_{q = 0}

Well intervention

This definition is based on the practical observation of wellbore pressure in shut-in wells for well intervention purposes.

It is the simplest and the most popular definition of formation pressure and is widely used in all upstream industry applications.

The definition of shut-in time is specific to each field or sometimes field area depending on the rock properties and the past well intervention experience.

Some conventions are to pick at the end of the radial flow, as the most common number from the past pressure tests, which makes this definition close (but still not equal) to the

Drain-boundary formation pressure estimate along the boundary of drainage area

p_e = \frac{1}{L_e} \int_0^{L_e} p(x,y,z) dl

where is the boundary of drainage area

Pressure Testing

This definition is based on the idea that there is a boundary line which restricts radial flow around a well, which is a fair assumption in most practical cases.

The advantage of this method over is that:

• it provides more accurate estimate of the pressure away from a given well
• it is not dependent on a single value , and accounts for varying  depending of drainage area of a given well at a given moment of time

Drain-area formation pressure estimate within the drainage area

p_r = \frac{1}{A_e} \iint_{A_e} p(x,y,z) dS

Well Flow Performance Analysis

This definition is based on the productivity index estimate and assumption that it stays constant

Historically this definition is using a specific symbol instead of usual 

9-cell formation pressure estimate from reservoir flow simulation model

p_{e9, \ i,j} = \frac{1}{9} \sum_{k=i-1}^{i+1} \sum_{l=j-1}^{j+1} p_{k,l}

Dynamic Modelling

It defines formation pressure as an arithmetic average of reservoir pressure values in all cells of reservoir flow simulation model adjacent to the cells containing a well-reservoir contact. 

In a particular case of vertical well the adjacent cells will be 9 cells around a cell with vertical well which raised the term 9-cell formation pressure. 

It provides a very rough and often inaccurate estimate of formation pressure and often used in history matching.

It should be used with caution when planning new wells, workovers, well performance analysis and testing existing dynamic model against other estimates.

A more accurate model estimate of formation pressure can be retrieved from a proper well shut-in in reservoir flow simulation model.