Definition

The Capacitance-Resistance Model (CRM) is a set of mathematical models relating production rate to the bottomhole pressure and offset injection rate.

In case the bottom-hole pressure data is not available it is considered constant over time.

The CRM is trained over historical records of production rates, injection rates and bottom-hole pressure variation.

Application

• Assess current production performance
  
  
  • current distribution of recovery against expectations
    
    
  • current status and trends of recovery against expectations
    
    
  • current status and trends of reservoir depletion against expectations
     
  • current status and trends of water flood efficiency against expectations
    
    
  • compare performance of different wells or different groups of wells 
    
    
• Identify and prioritize surveillance opportunities
  
  
• Identify and prioritize redevelopment opportunities

Advantages

• fast-track
  
  
• based on the robust input data
  
  
• does not involve full-field 3D dynamic modelling and associated assumptions

Limitations

CRM does not pretend to predict reserves distribution as dynamic model does.

It only provides hints for misperforming wells and sectors which need a further focus.

CRM can only be tuned for injectors with a rich history of rates variations.

CRM only works at long times and only in areas with limited drainage volume.

Technology

CRM trains linear correlation between variation of production rates against variation of injection rates with account of bottom-hole pressure history in producers.

against material balance and require current FDP volumetrics, PVT and SCAL models. 

The CRM has certain specifics for oil producers, water injectors, gas injectors and field/sector analysis. 

CRM – Single-Tank Capacitance Resistance Model

The CRM model is trying

The simulation is based on the following equation:

q^{\uparrow}(t) =  f \, q^{\downarrow}(t)  - \tau \cdot \frac{ d q^{\uparrow}}{ dt }  - \beta \cdot \frac{d p_{wf}}{dt}

where

J = \frac{q_{\uparrow}(t)}{p_r(t) - p_{wf}(t)} = \rm const

p_r(t) = p_{wf}(t) + J^{-1} q_{\uparrow}(t)

V_\phi = V_{rocks} \phi = \rm const

c_t \equiv \frac{1}{V_{\phi}} \cdot \frac{dV_{\phi}}{dp} = \frac{1}{V_{\phi}} \cdot \frac{1}{p_i - p_r(t) } \cdot \Bigg[ \int_0^t q_{\uparrow}(\tau) d\tau - f \int_0^t q_{\downarrow}(\tau) d\tau  \Bigg] = \rm const

\int_0^t q_{\uparrow}(\tau) d\tau - f \int_0^t q_{\downarrow}(\tau) d\tau = c_t \, V_\phi \, [p_i - p_r(t)]

q_{\uparrow}(\tau) d\tau - f q_{\downarrow}(\tau) d\tau = - c_t \, V_\phi \, \frac{d p_r(t)}{d t}

q_{\uparrow}(\tau) d\tau - f q_{\downarrow}(\tau) d\tau = - c_t \, V_\phi \, \bigg[ \frac{d p_{wf}(t)}{d t} + J^{-1} \frac{d q_{\uparrow}}{d t} \bigg]

The target function is:

E[\tau, \beta, f] = \sum_k \big[ q^{\uparrow}(t_k) - \tilde q^{\uparrow}(t_k) \big]^2   \rightarrow \min 

The constraints are:

\tau \geq  0 , \quad \beta \geq 0,  \quad  0 \leq f \leq 1

CRMP – Multi-tank Producer-based Capacitance Resistance Model

q^{\uparrow}_j (t) = \sum_i^{n_i} f_{ij} q^{\downarrow}_i(t)  - \tau_j \cdot  \frac{ d q^{\uparrow}_j}{ dt }  - \beta_j  \cdot  \frac{d p_j}{dt}

The target function is:

E[\tau, \beta, f] = \sum_k \sum_j \big[ q^{\uparrow}_j(t_k) - \tilde q^{\uparrow}_j(t_k) \big]^2   \rightarrow \min 

The constraints are:

\tau_j \geq  0 ,  \quad \beta_j \geq 0,  \quad f_{ij} \geq  0 , \quad \sum_i^{N^{\uparrow}} f_{ij} \leq 1

ICRM  – Multi-Tank Integrated Capacitance Resistance Model

Q^{\uparrow}_j (t) = \sum_i^{n_i} f_{ij} Q^{\downarrow}_i(t)  - \tau_j \cdot \big[ q^{\uparrow}_j(t) - q^{\uparrow}_j(0) \big]  - \beta_j \cdot \big[ p_j(t) - p_j(0) \big]

The target function is:

E[\tau, \beta, f] =  \sum_k \sum_j \big[ Q^{\uparrow}_j(t_k) - \tilde Q^{\uparrow}_j(t_k) \big]^2   \rightarrow \min 

The constraints are:

\tau_j \geq  0 ,  \quad \beta_j \geq 0,  \quad f_{ij} \geq  0 , \quad \sum_i^{N^{\uparrow}} f_{ij} \leq 1

References

1

2

3