Page History

...

1. Check the current production rate against the production target from FDP
   
   
2. If the diffference is big enough to justify the cost of production optimization (see point 8 below) then proceed to the next step 3 below
   
   
3. Assess formation saturation in pay zones based on well tests
   
   
4. Assess formation pressure based on well tests
   
   
5. Calculate the stabilized flow bottom-hole pressure
   
   
6. Gather the current bottom-hole pressure

   LaTeX Math Inline
   body p_{wf}

   
   
   
7. Check up the calculation aganst the actual 

   LaTeX Math Inline
   body p_{wf}

   
   
   
8. Recommend the production optimisation activities to adjust bottom-hole pressure 

   LaTeX Math Inline
   body p_{wf}

   :
   
   
   • adjusting the choke at surface
     
     
   • adjusting the pump settings from surface 
     
     
   • changing the pump depth
     
     
   • changing the tubing size
     
     
   • changing the pump
     
     

...