Definition

Primary Production Analysis is the specific workflow and report template on Primary Well & Reservoir Performance Indicators.

Application

assess current production distribution
assess current distribution of recovery against expectations
assess current status and trends of recovery against expectations
assess current status and trends of reservoir depletion against expectations
assess current status and trends of water flood efficiency against expectations
quantitatively compare performance of different wells or different groups of wells
identify and prioritize redevelopment opportunities

Technology

Primary Production Analysis is built around production data against material balance and require current FDP volumetrics, PVT and SCAL models.

It includes well-by-well diagnostics and gross field diagnostics, but may be extended to sector-by-sector diagnostics.

Metrics

Primary Production Analysis includes the following metrics:

	Metric name	Diagnostic plots	Objectives
1	Production History Map	Background = Structure Bubbles = q_o, q_g , q_w, q_inj Number = CurVRR, P_e	Production Distribution Overview
2	Recovery Map	Background = STOIIP Bubbles = Q_o, Q_g , Q_w, Q_inj Number = CumVRR, P_e	Recovery Distribution Overview
3	Cross-section	Background = STOIIP & Structure Bubbles = VRR Number = P_e , P_em
3	Production History Graphs	Left Axis = q_o, q_g , q_w, q_inj, Rigth Axis = Y_w, GOR, P_e , N_p, N_inj Hor Axis = Elapsed Time	Production History Overview
4	Decline Curve Analysis	Left Axis = q_o1, q_liq₁, q_inj1, Rigth Axis = Y_w, GOR, VRR, P_e Hor Axis = Elapsed Time	Production Forecast
5	Recovery Diagnostic	Left Axis = q_o1, q_liq₁, q_inj1 Rigth Axis =Y_w, GOR, VRR, P_e, P_em Hor Axis = RF	Estimate recovery efficiency and pressure decline
6	Watercut Diagnostic	Left Axis = Y_w, Y_wm Hor Axis = q_liq	Check for water balance and thief water production
7	GOR Diagnostic	Left Axis = GOR, GOR_gm Hor Axis =q_o	Check for gas balance and thief gas production
8	Injection Efficiency Diagnostics	Left Axis = PIR , PIR_m Hor Axis = Y_w	Evaluate WI efficiency
9	Well Performance Analysis	Left Axis = P_{wf_IPR} , P_{wf_VLP} Hor Axis = q_o	Check for the optimal production/injection target
10	Productivity Index Diagnostic	Left Axis = J_PI, J_PIm Hor Axis = dP = P_wf - P_e	Check for PI dynamics

Below is the list of the production properties involved in the above metrics.

Property Abbrevy

Property Name

Formula

VRR_cum

Cumulative Voidage Replacement Ratio

LaTeX Math Block

anchor	1
alignment	left

{\rm VRR_{cum}} = \frac{B_w \, Q_{WI}}{B_w \, Q_W + B_o \, Q_O + B_g Q_G - B_g R_s Q_O}

VRRcur

Current Voidage Replacement Ratio

(month over month)

LaTeX Math Block

anchor	1
alignment	left

{\rm VRR_{cur}} = \frac{B_w \, q_{WI}}{B_w \, q_W + B_o \, q_O + B_g (q_G - R_s Q_O)}

RF

Recovery Factor

LaTeX Math Block

anchor	1
alignment	left

{\rm RF} = \frac{Q_O}{V_{STOIIP}}

Y_w

Watercut (production)

LaTeX Math Block

anchor	1
alignment	left

{\rm Y_w} = \frac{q_W}{q_{LIQ}}

Y_wm

Watercut (proxy-model)

LaTeX Math Block

anchor	1
alignment	left

{\rm Y_{wm}} = \frac{1}{1 + \frac{K_{ro}}{K_{rw}} \cdot \frac{ \mu_w}{\mu_o}  \cdot \frac{B_w}{B_o} }

LaTeX Math Block

anchor	1
alignment	left

s_w = \frac{Q_o \, B_o}{V_\phi}

GOR

Gas-Oil Ratio (production)

LaTeX Math Block

anchor	1
alignment	left

{\rm GOR} = \frac{q_g}{q_o}

GOR_m

Gas-Oil Ratio (proxy-model)

LaTeX Math Block

anchor	1
alignment	left

{\rm GOR_m} = R_s +  \frac{k_{rg}}{k_{ro}} 
\cdot \frac{\mu_o}{\mu_g} 
\cdot \frac{B_o }{B_g}

q_LIQ

Liquid rate

LaTeX Math Block

anchor	1
alignment	left

q_{LIQ} = q_O + q_W

PIR

Production Injection Ratio (production)

LaTeX Math Block

anchor	1
alignment	left

{\rm PIR} = \frac{Q_O}{Q_{WI}}

PIR_m

Production Injection Ratio (model)

LaTeX Math Block

anchor	1
alignment	left

{\rm PIR_m} = { \frac{1}{VRR} } \cdot { \frac{1-Y_w}{ Y_w + (1-Y_w) \bigg[ \frac{B_o}{B_w} - \frac{B_g}{B_w}(GOR - R_s) \bigg] } }

J_O

Oil Productivity Index

LaTeX Math Block

anchor	1
alignment	left

{\rm J_{O}} = \frac{q_O}{P_e - P_{wf}} {\quad \Rightarrow \quad} P_{wf} = P_e - \frac{1}{J_O} q_O

J_PI

Total Productivity Index (production)

LaTeX Math Block

anchor	1
alignment	left

{\rm J_t} = \frac{q_t}{P_e - P_{wf}}

J_PIm

Total Productivity Index (model)

LaTeX Math Block

anchor	1
alignment	left

{\rm J_{tm} } = \frac{2 \pi \sigma}{\ln \frac{r_e}{r_w} +0.5 + S}

Expand

title	PIR equation deduction

LaTeX Math Block

anchor	1
alignment	left

VRR = \frac{B_w \, q_{WI}}{B_w \, q_W + B_o \, q_O + B_g \, [ q_G - R_s \, q_O] } =  \frac{B_w \, q_{WI}}{B_w \, q_W + B_o \, q_O + B_g \, [ GOR - R_s] q_O } = \frac{B_w \, q_{WI}}{B_w \, q_W + [ B_o  + B_g \, ( GOR - R_s) ] \, q_O }

LaTeX Math Block

anchor	1
alignment	left

VRR = \frac{q_{WI}}{q_W + \bigg[ \frac{B_o}{B_w}  + \frac{B_g}{B_w} \, ( GOR - R_s) \bigg] \, q_O }

LaTeX Math Block

anchor	1
alignment	left

Y_w=\frac{q_W}{q_W + q_O} \rightarrow \frac{q_O}{q_W} = \frac{1-Y_w}{Y_w} \rightarrow q_W =  \frac{Y_w}{1-Y_w} \, q_O

LaTeX Math Block

anchor	1
alignment	left

VRR =  \frac{q_{WI}}{q_O} \cdot \frac{1}{\frac{Y_w}{1-Y_w}  + \bigg[ \frac{B_o}{B_w}  + \frac{B_g}{B_w} \, ( GOR - R_s) \bigg] } =
\frac{q_{WI}}{q_O} \cdot \frac{1-Y_w}{Y_w  + (1-Y_w) \, \bigg[ \frac{B_o}{B_w}  + \frac{B_g}{B_w} \, ( GOR - R_s) \bigg] }

LaTeX Math Block

anchor	1
alignment	left

PIR=\frac{q_W}{q_{WI}} = \frac{1}{VRR} \cdot \frac{1-Y_w}{Y_w  + (1-Y_w) \, \bigg[ \frac{B_o}{B_w}  + \frac{B_g}{B_w} \, ( GOR - R_s) \bigg] }

Diagnostic

Expand

title	Expand

Show If

group	sofoil

Введение

История добычи

Рис. 1. График общей добычи и пластового давления в добывающих и нагнетательных рядах

Рис. 2. История фонда скважин

Рис. 3. График среднескважинных дебитов и пластового давления в добывающих и нагнетательных рядах

Карты разработки


Рис. 2.1. Карта текущих отборов	Рис. 2.2. Карта кумулятивных отборов

Падающая добыча

Стационарная добыча

Стационарная добыча это режим в котором давление на линии отбора поддерживается постоянным за счет газовой шапки, аквифера или закачки в нагнетательные скважины.

Растущая добыча

Динамика пластового давления

Снижение пластового давления приводит к потере депрессии и следовательно дебита случае если забойное давление достигло технологического минимума.

Снижение пластового давления приводит к снижению пористости и проницаемости коллектора, что приводит к потере продуктивности и снижению дебита сквжаины.

Снижение пластового давления ниже давления насыщения приводит к выделению газа в призабойной зоне и потере продуктивности скважин по жидкости за счет более высокой мобильности газа и за счет дроссельного охлаждения, что в итоге приводит к снижению дебита скважины.

Диагностические графики анализа добычи NDR

q_1o vs RF

Рис. 1. График среднескважинного дебита нефти и пластового давления от КИН

LaTeX Math Block

anchor	1
alignment	left

q_{1o} = \frac{\sum Q_o }{ \sum {t_o}}

LaTeX Math Block

anchor	1
alignment	left

RF = \frac{\sum_t Q_o }{V_{STOIIP}}

Yw vs RF

Рис. 1. График обводненности от КИН

Pe vs RF

Диагностические графики анализа заводнения WIR

Sample Case 1 – Sector Analysis


Fig. 1. Production History Map	Fig. 2. Recovery Map	Fig. 3. Cross-section & PLT, permeability, GOC, OWC


Fig. 4. Production History Graphs	Fig. 5. Decline Curve Analysis	Fig. 6. Recovery Diagnostic


Fig. 7. Watercut Diagnostic	Fig. 8. GOR Diagnostic	Fig. 9. Injection Efficiency Diagnostics


Fig. 10. Well Performance Analysis (VFP + IPR)	Fig. 11. Productivity Index Diagnostic	Fig. 12. Well Completion & PLT

Sample Case 2 – Producer Analysis


Fig. 1. Production History Map	Fig. 2. Recovery Map	Fig. 3. Cross-section & PLT


Fig. 4. Production History Graphs	Fig. 5. Decline Curve Analysis	Fig. 6. Recovery Diagnostic


Fig. 7. Watercut Diagnostic	Fig. 8. GOR Diagnostic	Fig. 9. Injection Efficiency Diagnostics


Fig. 10. Well Performance Analysis (VFP + IPR)	Fig. 11. Productivity Index Diagnostic	Fig. 12. Well Completion & PLT

Sample Case 3 – Injector Analysis


Fig. 1. Production History Map	Fig. 2. Recovery Map	Fig. 3. Cross-section & PLT


Fig. 4. Production History Graphs


Fig. 10. Well Performance Analysis (VFP + IPR)	Fig. 11. Injectivity Index Diagnostic	Fig. 12. Well Completion & PLT

Page tree

Versions Compared

Old Version 97

New Version 98

Key

Definition

Application

Technology

Metrics

Diagnostic

Введение

История добычи

Карты разработки

Падающая добыча

Стационарная добыча

Растущая добыча

Динамика пластового давления

Диагностические графики анализа добычи NDR

q_1o vs RF

Sample Case 1 – Sector Analysis

Sample Case 2 – Producer Analysis

Sample Case 3 – Injector Analysis

Page tree

Page History

Versions Compared

Old Version 97

New Version 98

Key

Definition

Application

Technology

Metrics

Diagnostic

Введение

История добычи

Карты разработки

Падающая добыча

Стационарная добыча

Растущая добыча

Динамика пластового давления

Диагностические графики анализа добычи NDR

q1o vs RF

Sample Case 1 – Sector Analysis

Sample Case 2 – Producer Analysis

Sample Case 3 – Injector Analysis

q_1o vs RF