...
Specific type of Production Analysis (PA) workflow based on correlation between single-well or multi-well production/injection history and field-average formation pressureIt may also include BHP pressure data records if they are available and were varying over time.
The key assumption of MatBal is a pseudo-steady state correlation between cumulative offtakes/intakes and formation pressure dynamics.
...
MatBal Pressure @model | MatBal Flow @model |
Formation pressure model only | Formation pressure and flowrate model |
In some cases a similar analysis can be performed using the correlation between production/injection history and BHP which is called Flowing Material Balance Analysis (FMB).
Objectives
...
Check if the field is under volume-constrained production (PSS) |
Assess drainage volume |
Assess reservoir compressibility |
Check if water and gas propagation match uniform sweep model |
Verify oil/gas FVF |
...
[ Material Balance Pressure @model ] [ Material Balance Flow @model ]
[ Flowing Material Balance Analysis (FMB) ]